![]() ![]() Pushing a connector that actually doesn't fit or using excessive force could cause damage to the components on the motherboard or crack the motherboard itself. Connector part numbers Motherboard connector: Molex 39-28-1203 Cable connector: Molex 39-01-2200 Terminals: Molex 39-00-0168,Molex 44476-1111 Maximum. While this is an option you can try, we don't necessarily recommended it. It will be a tight fit and require a small bit of force to make the connector fit in place correctly. You can plug the 24-pin connector into the 20-pin motherboard connection without detaching or moving the additional 4 pins. The original ATX standard connector used for powering the motherboard was a single 20-pin Molex that has all the required +12VDC and +5VDC voltages with huge.There will be no need to detach or move the additional 4 pins. ATX 20 pin ATX 20 pin plus 4 pin CPU ATX 24 pin, plus 4/8pin And some weird inbetween states with motherboards having 4-pin molex connectors going to the board. ![]() The adapter will connect to the 24-pin connector, converting it to a 20-pin connector, allowing you to connect it directly to the motherboard's 20-pin connection. While not the highest quality power supply out there, it certainly has all the contemporary features, including a 4+4 pin 12V addtiional CPU power connector. You can purchase a 24-pin to 20-pin adapter from a computer retailer.If the 24-pin power connector on your power supply does not allow the detachment of the 4 additional pins, you can still connect it to the motherboard's power connection one of two ways. These extra pins supply additional power for higher-end motherboards. The 4 additional pins can be left unplugged since they are not needed with motherboards with a 20-pin power connection. By detaching the 4-pins or moving them out of the way, the connector becomes a 20-pin power connector. Detaching those pins should allow enough room for the connector to be plugged into the motherboard power connection. Note: The 24-pin power connector contains 4 additional pins as compared to the 20-pin connector. To supply the additional power required by PCI Express slots, the 24-pin main power connector was added to ATX12V 2.0. It has the last four pins on a detachable section that slips out, so you can plug it into an older motherboard (see the diagram above). Mainly there are two versions of ATX power supply connectors: 24-pin and 20-pin connectors. Thankfully, almost all 24-pin power connectors are designed so that four of the pins can be detached or moved out of the way. What is the purpose of the 8 pin ATX 12v Power Connector plug-in at the top of my mobo (noob question). Many new ATX12V v2 compliant PC power supplies come with a dual 24/20 (sometimes called 20+4) connector for backward compatibility. However, some motherboards still feature a 20-pin ATX power connection. Almost all of the new power supplies used today feature a 24-pin power connector to connect to a computer motherboard.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |